Handy Terminal Block Wire Connector (10pieces)

£9.99 £15.99 Save 38%

Number of Connectors:
Trust badge

A quick, easy, safe, and secure way to connect wires for home and automotive in just a snap.


  • Safe : No danger of loose cables or brittle tape, clear and visible.
  • Convenient : With test holes, no need to remove the tape to measure voltage.
  • Quick : plug it in directly, unplug it if it's misconnected and plug it back
  • Reliable : Each contact is independent of the shrapnel, and different wire diameters are also available, which can be safely short-circuited.
  • PA 6.6 material , permanent temperature resistance of 105 ℃, no embrittlement.
  • You can connect up to 4mm / 32A / 400V .


  • Number of channels : 3 digits / 5 digits / 8 digits
  • Rated voltage : 250V
  • Nominal current : 20 A
  • Connectable cable cross section range : 0.75-2.5mm²
  • Available wire cross section range : 18-12 AWG
  • Color : gray
  • Wiring method : plug-in
  • Wiring direction : front
  • Pollution degree : 2
  • Supports instantaneous peak voltage : 4 KV
  • Insulation material : PA
  • Flame retardant rating : UL94 V-0 or V-2
  • Stripping Length : 11-12mm
  • Stripping Length Range : 0.47 in


  • Single core and stranded wire insulation 11-12mm.
  • Move the orange lever up with your thumb and open the spring.
  • Pass the cable through the spring opening.
  • When the orange pressure bar is pressed, the cable is clamped automatically.


  • After pushing the orange bar up with your thumb, you can remove the cable.


  • Please allow slight measurement deviations due to manual measurements.
  • Due to the different monitor and light effect, the actual color of the item may be slightly different from the color shown on the pictures.


  • 10pcs x Handy Terminal Block Wire Connectors